Published by   Noria Logo
 
August 03, 2016
Previous Edition
 
In This Issue
•  Advice for Writing Lubrication PMs
•  Is One Oil Sampling Point Enough?
•  When to Flush an Oil System
•  Oil Filter or Strainer? How to Decide
 
Ad Image
 
 
Advice for Writing Lubrication PMs
 
When writing preventive maintenance (PM) procedures that require multiple grease guns to be taken up ladders and stairs, add a stop point in the PM that states, for example, "Before ascending these stairs, make sure you have guns A, C and D." This prevents technicians from having to carry too much equipment up flights of stairs or ladders, which is a safety benefit. It also keeps them from reaching the top of the stairs with the incorrect guns and mixing greases in the equipment, which can lead to premature failures. (Patrick Walsh, BHP Billiton)
 
Join us in Portland, Oregon, on Aug. 9-11 for Machinery Lubrication I training.
 
 
 
Be an uptime hero: Protect your hard-working gearbox
 
Be an uptime hero: Protect your hard-working gearbox
 
Stop throwing away perfectly good oil. Instead, start with great oil; then keep it free of contamination. At LE, we have gone 7 years and counting on the same gear oil in one hard-working gearbox. We can help you do the same.
 
 
Find Out How We Did It
 
 
Is One Oil Sampling Point Enough?
 
Is One Oil Sampling Point Enough?
 
A single oil sampling point may not always be adequate for diagnosing abnormal conditions inside a machine. By having primary and secondary oil sampling locations, you can better track alarming conditions and detect incipient failures.
 
 
Read More
 
 
Goliath. Meet David.
 
Goliath. Meet David.
 
Don’t let dirt particles take down your giant machines. Chevron’s ISOCLEAN® Certified Lubricants represent the most stringent OEM standards.
 
 
Click to Learn More
 
 
When to Flush an Oil System
 
     Question: When should you consider flushing an oil system?
 
Get the Answer
 
 
Think Oil Heating Up is No Big Deal? Think Again
 
Think Oil Heating Up is No Big Deal? Think Again
 
Extended high-heat exposure can cause a phenomenon that permanently ruins oil viscosity, which in turn can result in quickly escalating (and often catastrophic) wear. What is the name of this phenomenon?
 
 
Get the Answer
 
 
Oil Filter or Strainer? How to Decide
 
Oil Filter or Strainer? How to Decide
 
An oil filter and a strainer generally seek to perform a very similar task — to remove contaminants as oil passes through — but at a completely different scale. Strainers are employed to capture much larger contaminants, while filters usually are much more complex in regard to the pathways through which oil must pass.
 
 
Read More
 
 
Not Just a Pretty Face
 
Not Just a Pretty Face
 
Luneta designed its sight glass to be easy to view, but the face of this innovative inspection tool is also built to be tough as nails. Watch us test it against the competition in our newest impact test.
 
 
Watch the Impact Test
 
 
Poll: Know How or Why to Perform a Task?
 
     Poll Question: Which is more important: knowing how to perform a task or knowing why?
 
Cast Your Vote
 
 
White Papers
•  Choosing an In-Service Oil and Fuel Analysis Solution
•  Managing Particle Contamination with Chevron ISOCLEAN® Certified Lubricants
•  Ultrasound Lube Technician Handbook
•  Water in Oil Contamination
 
 
Explore Topics
•  Oil Oxidation
•  Wear Debris Analysis
•  Lubrication Programs
•  Grease Compatibility
•  Maintenance And Reliability
•  Turbine Lubrication
 
 
Noria Training Calendar
 
AUGUST 2016
Machinery Lubrication I
August 9-11 - Portland, OR


 
 
SEPTEMBER 2016
Oil Analysis III
September 13-15 - Tulsa, OK
Machinery Lubrication I
September 27-29 - Louisville, KY
 
 

 
 
BUYERS GUIDE  |  WHITE PAPERS  |  JOBS  |  BOOKS  |  TRAINING  |  CONFERENCE
 
Connect With Us
Noria Facebook
Facebook
Noria Twitter
Twitter
Noria LinkedIn
LinkedIn
 
Subscribe to this and other Noria publications online.
Need help? Talk to the experts at Noria Corporation.
 
Published by   Noria Logo