Read in Your Browser
Published by   Noria Logo
 
March 25, 2020
Previous Edition
 
In This Issue
•  How to Get More Life from Breathers
•  Why New Oil Should Be Filtered
•  How Incompatible Oil Affects Seals
•  A Guide to Oil Storage Containers
•  Analyzing Compressor Failures
 
Ad Image
 
 
How to Get More Life from Breathers
 
When a desiccant breather becomes saturated, it can often be reused if it is dried out. Attach the breather to a clean, dry compressed air line. Regulate the pressure down to 5 pounds per square inch and the flow to 0.5 standard cubic feet per minute. The desiccant will regenerate and allow the breather to be reused. Most desiccant breathers can be regenerated up to three times, with each time resulting in a slightly shorter lifespan. (Michael Lofald, SAPPI Fine Paper)
 
Join us in Houston, Texas, on May 19-21 for Machinery Lubrication I training.
 
 
 
When you Need to Tackle an Entire Lubrication Program
 
When you Need to Tackle an Entire Lubrication Program
 
Machinery Lubrication Engineer (MLE)® is the top-tier management credential for those practitioners who are uniquely equipped to guide organizations through program design, implementation & continuous improvement. Is that you?
 
 
It's Your Career. Read More
 
 
Why New Oil Should Be Filtered
 
Why New Oil Should Be Filtered
 
You should never assume new oil is fit for use right out of the container. In many cases, the lubricants you receive may be several cleanliness codes dirtier than what should be put into the equipment.
 
 
Read More
 
 
Does My Facility Have the Right Food-Grade Lubricants?
 
Does My Facility Have the Right Food-Grade Lubricants?
 
If you work in the food processing industry, you need to know how the Food Safety Modernization Act impacts your lubrication program and the lubricants used. Our online Food Processing Equipment Lubrication course will help.
 
 
Find Out More
 
 
How Incompatible Oil Affects Seals
 
     Question: What are two ways a seal may change when in contact with an incompatible oil?
 
Get the Answer
 
 
Studying for Certification? We Have You Covered!
 
Studying for Certification? We Have You Covered!
 
The right tools for the right job is critical in every aspect of life. Noria's Level I MLT/Level I MLA Study Pack contains all the essential tools you need to prepare for both ICML Level I MLA and MLT certifications.
 
 
Order My Study Pack
 
 
A Guide to Oil Storage Containers
 
A Guide to Oil Storage Containers
 
Modern oil storage containers and dispensing systems are vital tools for maintenance programs. Learn the different types of oil storage containers and dispensing systems as well as how you can configure them for your needs.
 
 
Read More
 
 
New! Machinery Lubrication Engineering Course
 
New! Machinery Lubrication Engineering Course
 
Go beyond the traditional lubrication subjects and undertake a holistic approach toward developing, implementing and managing a world-class lubrication program with Noria’s new Machinery Lubrication Engineering course.
 
 
Find Out More
 
 
Analyzing Compressor Failures
 
From "Compressors: How to Achieve High Reliability and Availability":

When doing failure analysis and troubleshooting, all findings and conclusions must be supported by data and must conform to science. Because the failure of compressor components is not influenced by the supernatural, there will be logical explanations for everything. Every effect has a cause, and in nearly 100 percent of all failure incidents, a series of small contributing causes successively reduced the component failure margin. Ultimately several — in themselves small — deviations will combine into one big problem.
 
Read More About This Book
 
 
White Papers
•  Simplified Universal Marshalling: Its Evolution and Benefits
•  The Cost Effective Benefits of a High Performance Kidney Loop System
•  Ultrasound Lube Technician Handbook
 
 
Explore Topics
•  Automatic Lubrication
•  Grease Guns
•  Fuel Dilution
•  Oil Flushing
•  Preventive Maintenance
•  Synthetic Lubricants
 
 
Noria Training Calendar
 
MAY 2020
Machinery Lubrication I
May 19-21 - Houston, TX
Oil Analysis II
May 19-21 - Houston, TX
 
 
JUNE 2020
Machinery Lubrication I
June 16-18 - Myrtle Beach, SC
Machinery Lubrication II
June 16-18 - Myrtle Beach, SC
 
 

 
 
BUYERS GUIDE  |  WHITE PAPERS  |  JOBS  |  BOOKS  |  TRAINING  |  CONFERENCE
 
Connect With Us
Noria Facebook
Facebook
Noria Twitter
Twitter
Noria LinkedIn
LinkedIn
 
Subscribe to other Noria publications online.
Need help? Talk to the experts at Noria Corporation.
 
Published by   Noria Logo
 
This email was sent to {{ contact.email }} because you signed up to receive {{ subscription_name }} from {{ site_settings.company_name }}. To ensure delivery, please add {{ content.reply_to }} to your address book or safe sender list.
Want to make a change? You can manage your email preferences, discover other options or unsubscribe from these emails. You can also go here to view Noria's Privacy Policy.
{{ site_settings.company_street_address_1 }} {{ site_settings.company_city }}, {{ site_settings.company_state }}